Rin Cat (鈴猫)

I just checked the code, but sadly the driver not support it. It do check if the hardware support FTM, but nothing else will do. https://github.com/RinCat/RTL88x2BU-Linux-Driver/blob/master/core/efuse/rtw_efuse.c at line 3010 It...

I may add a few parameters docs, but you can list them by using `modinfo 88x2bu`.

From the USD ID, this driver should supported it.

I suspect you are using in kernel unfinished rtw88 driver. Any logs in `dmesg` and `lsmod`?

I just updated the docs and you should see [this](https://github.com/RinCat/RTL88x2BU-Linux-Driver#linux-518-and-rtw88-driver=).

Hi, what is the kernel version?

Seems this https://github.com/RinCat/RTL88x2BU-Linux-Driver/commit/9f94efd6b0ea7bce67781ba4a424d4d7befd2cd1, you need change 4.19 to 4.18 since this is backport. And I cannot put this in the driver because this is distribution backport, you need find out...

@CGarces I know that exists, but I prefer not add any distribution specific patches, as I can't check if each kernel in each distribution backports a certain patch. The easiest...

You should check the link speed first, as they are supposed to decrease speed if nearby devices are using the network or there are some interference. It usually has nothing...

It's hard to say what to look for. Anything shows signal / channel / rx / tx / power etc. may give some hints.