RichCattell

Goggles used: v1 Device brand/type Samsung Galaxy Note 10 Plus Android version: 11 Used cable: usbc to usbA with USB A to C adapter 25mbit working? yes 50mbit working? yes...

HI.. Sorry for delay in replying.. First of all, if you want to use my latest version you should use the "testing" branch - this has the latest updates. The...

Im not sure what you mean, but im assuming that you have saved the settngs with M500 after the G30 completes? Also, it might be that your probe is activating...

I did actually implement a fix for this quite a while ago, but i removed it because i thought it was causing issues with glitchy movement. I never really confirmed...

I havnt implemented this "fix" because it at the time when i tried it, it appeared to cause glitching when printing at high speed. The consensus seemed to be that...

G29 currently has issues in this version - I diddn't actually write the code for this function, it was imported from Johann's firmware, but it seems the version that i...

Have you tried running the Autocalibration to setup your printer? G30 will display the current state of your printer G30A will attempt to automatically calibrate the printer Adjusting all values...

Also.. make sure your using the "testing" branch of my firmware to get the latest updates to the Autocalibration

If the opposite points (ox, oy, oz) are out by the same amount then this would indicate that the diagonal rod length set in the firmware is incorrect. If just...

I've made some changes to my tower adjustment code.. could you download the latest version from the testing branch and try this again?