RempageR1

Same here on iPhone 11 and IOS 16.

Connected the scope today and the issue is also there on channels 1 and 2 (albeit less). So this is a generic issue on low-RPM fuel delivery.

Did some more testing, and you can see the scheduler status is different for output 3 is different at the time I see the issue. The two Serial.print() commands were...

It only happens at very specific RPMs like 348. But that number is just a guess, just turn the RPM knob until you trigger it. I can get you the...

[2024-01-12_15.57.19.zip](https://github.com/noisymime/speeduino/files/13921141/2024-01-12_15.57.19.zip) Above is the standard tune I use to reproduce this. I see the issue at 256 RPM on the Teensy. I have also dusted off my old mega2560 and...

I am indeed using the Vmax trigger on my motorcycle and I am the author of that code :). As I`m not really a coder, perhaps you can tell me...

Thank you for speeding up this code :). If there is anything I can test for the timing issue on the Teensy i`d be happy to help. Please note it...

I`ll close this one and open one with proper (new) information. This is happening on both Teensy 3.5 and my new 4.1 setup. It happens on all injection channels, all...

I understand you can normally tune those cells, but like I mentioned it impacts throttle responsiveness in my bike. If you are already on the very-lean site and them open...