Recep Aydın Güleç

### Which branch of GassistPi are you using ? Latest ### Board and OS details: ``` at /etc/os-release cat /etc/rpi-issueprocessor : 0 model name : ARMv7 Processor rev 4 (v7l)...

Using other receiver front ends with a tayloe mixer

1

Can I and Q outputs of any receiver frontend using a Tayloe mixer be applied to the RSP pico for which you have prepared the software? For example, If the...

RDA5807 never starts normally - SOLVED

4

Hi, I built the FM radio circuit using the RRD-102 module containing RDA5807. I used an arduino running at 3.3v. However, RDA5807 never starts normally. It only works when I...

**Describe the bug** I built the marauder circuit using the ESP32-wroom 32u module. For the upload I used a USB to serial converter with FT232. (I connected IO0 pin to...

Reception issue

5

Hi, I set up the PicoSDR receiver according to your application diagram (using the Pico2). I used a 74CBTLV3253 and an MCP6022, and since I powered both of them with...

Binary files and component values

1

Hi, 1) What is the difference between the rp2350-pico2 and rp2350-riscv-pico2 binary files? Which one should I use for the RPI pico2? 2) When using the MCP6022 as opamp, should...