Ralphy140
Ralphy140
Hi Mick, Just letting you know this is still an issue on version 3.03, not sure when you will get around to bumping the HA addon to 3.04 but would...
It's on version 1.1.3
Ahh yes sure, this is one of the very first release devices and I moved over to manual firmware to try and get Bluetooth working before it was included due...
Ok have just updated to the latest firmware, Hardware: 1.2.4 Its running the SEN0395, no BLE, stable version. I am also using ESPHome 2024.7.0. I will let you know if...
Ok seems like after updating to the latest firmware the issue is resolved though i find it interesting that the Temp seems to runs hotter in general after the update....
As described in a similar request this the challenge is that the ESPHome device is the server not the HA so the ESPHome device would need to setup the tunnel...
In this architecture you would use a public MQTT broker like hivemq, You would connect both the endpoint of the ESP and the HA server to it. Then it will...
You will need to remove the refrence to temp2 if you are not using the ds18b temp sensor package start at line 147 ``` # float temp2_f = id(temp2).state *...
Yep same problem, Never had it drop out before updating to 2024.9 and then it stopped working so will try removing and re-adding
As a word or warning, When i re-added I lost all my sensor history, Not a huge issue but i had ~4 years of hystoical data thats now lost in...