Ben V. Brown

Please flash the vendor firmware first to confirm your hardware is functioning first and also perform a settings reset :)

This is hard to debug as there isnt much that would normally cause this other than either a power supply not working well, bad contacts or misbehaving tip. Could you...

I would only add this as a compiler define; as I think I mentioned in the chat; rather than a setting itself to turn off the limiter.

Hi, It looks like you have screen burn in on your OLED. This is not the manufacturers support forum, so I don't have magic to offer. The screen is a...

It has been reported on the miniware firmware as well. I'm using the same oled screen initialisation code as miniware so it's not like I'm driving it "harder".

@dzarda Absolutely, OLED screens degrade depending on their environment as they have a finite lifespan.

@Houseman74 It should work in the Pinecil/TS100/TS80/TS80P as far as I understand.

To confirm, which python script did you use [(was it this one)](https://github.com/Ralim/IronOS-Meta/blob/main/Bootup%20Logos/img2logo.py)? Any chance you can attach the logo you tried? What DFU loader version does it show on the...

The SQ-001 is not supported. And their bootloader has different quirks to the Miniware one. I dont have one and I have no idea why their DFU firmware would reject...

The device is not officially supported; it _should_ work but I have zero idea around the recovery if it goes wrong etc.