IronOS
IronOS copied to clipboard
Ralim
Open Source Soldering Iron firmware
**Describe the bug** I have an MHP30 running version 2.22 that is failing to boot at anything above 5V. When plugged in the device simply flashes the boot logo briefly...
**Support for Sequre S60** im not sure if it is possible or not to support IronOS on the Sequre S60. I recently added this soldering pencil to my bench as...
Since the TS101 code seems to be in Dev and it's already in the list of supported devices, is there ongoing work on a "how to" for this? Or is...
After updating to 2.21.5d96470 with MacBook Air M2 with a USB-C cable directly connected between the devices, the Pinecil boots briefly, shows a 5.1v level, then crashes and reboots continuously....
**Describe the solution you'd like** curently you need to poll data from BLE however BLE provids functions for the server to notify the client of changes in data. this would...
USB PD wont go to 20V on 2.22 firmware some chargers only go to 16v and some 18V Both chargers work with 2.21 firmware on 20V **To Reproduce** Flash 2.22...
Hello, Here is a little mod to add a WS2812B to a Pinecil V2. Obviously, it works better with the [transparent shell](https://pine64.com/product/pinecil-replacement-shell-transparent/)! Pinecil V2 has a free GPIO_12 accessible through...
* **Please check if the PR fulfills these requirements** - [x] The changes have been tested locally - [] There are no breaking changes * **What kind of change does...
* **Please check if the PR fulfills these requirements** - [x] The changes have been tested locally - [x] There are no breaking changes * **What kind of change does...
i have a few questions: 1)Will it work pts200 tip (wich has basically the same form factor of ts101 tip but it has 4ohm resistance) on ts101 working with ironOS?...
