Rainer-G
Rainer-G
Excellent idea and fast implementation, 4 days from opening the issue until it found the way into Ed's code! Many thanks to xP373Rx and Ed! Compiled and worked from the...
sorry, Ed, copy & paste put in some HTML coding, this should be better: I tested the station frontend.streamonkey.net/radioc-live with Winamp and saw the bitrate varying from less than 50kbps...
Hello Ed, I meant the bitrate displayed using the test button on the web interface. I do not see this as an issue and there is no need for a...
nice project, does it suppoort Ogg Vorbis / AAC / WMA / MIDI in addition to MP3?
Hi Andy, look at the schematic attached, the transformers are between the MP3 Module ( VS_out in the schematic ) and the amplifieer ( PAM in the schematic ). VREF...
Hi Piotr, the MP3 Module is the VS1053, I attached this extract of my Board layout for Andy: The VS_Out Pins war named so on my circuit diagram, the VS1053...
Looking at the PCB picture, I cannot find the PCB's USB connector, on December's picture it is on top side of the board??? Did you check the voltage ? Rainer
Before putting the ESP32 into the bin, try with a different ( shorter ) USB cable and/or reduce the upload speed ...
Just for my curiosity: if you change Flash Frequency to 80 MHz and Upload Speed to 921600, will it still work ? Please try one after the other, not both...
Both changes are done inside the Arduino IDE, look at your screenshot, there are select option on the right of upload speed and flash frequency, ( but this does not...