Raphael Hehl

[1.8-1.7.txt](https://github.com/emsesp/EMS-ESP32/files/15147460/1.8-1.7.txt) This is a change from 1.8 to 1.7 kw

 I can only select UINT i don't have the option UINT16. The current heating run is over, I'll let you know if something happens, I've already played around with...

Took a while (low energy house & heating already in summer mode) But I can confirm it works perfectly: HomeAssistant:  Energiemanager App:  The only noticeable thing that I...

I don't know the criteria for a "real entity", but I would say that a real-time consumption display is a very useful use case for the EMS ESP if he's...

F.Y.I: https://github.com/emsesp/EMS-ESP32/discussions/1678#discussioncomment-9283496

@MichaelDvP 2489W watts sounds absolutely correct, which corresponds approximately to the excess that I have observed in the last few days when the heat pump started, i will let u...

@MichaelDvP I can confirm it seems to be something like the Powerlimit:  After reaching an excess of around 2500W that was fed into the battery, the "power limit" which...

@Vippis2000 https://github.com/emsesp/EMS-ESP32/issues/1717#issuecomment-2088755872 I would just write 2500 in there and see if the compressor started after about 30 seconds

I would just write it in manually now without any schedule to see if it basically works If that is successful, you could create a function similar to that of...

 It would also be worth mentioning that I now have 4500W surplus but the power limit remains at around 2600  and when the compressor is finished it takes...