PlusAzuki
PlusAzuki
> https://github.com/wongsyrone/openwrt-Pcap_DNSProxy/blob/master/files/pcap-dnsproxy.hotplug 这个虽然有地方改是挺不错的...但是要手动额外保存文件...能不能直接做个开关到 /etc/config 里?
最近证实了一个大问题...在解析一大串域名后会假死(?)...无错误日志,之前是会抛出一个错误日志的说...
I also encountered this problem, and I noticed that I could get a response from the end of the 6in4 tunnel, but warp showed that all the services that depended...
我也遇到了这个问题...看起来舰队抽奖消息是没漏的，但是打开直播间能发现好多都没参与到，就很奇怪...目前想到的最下策是先改下客户端处理这类“同时间多礼物”的时候设置个间隔（例如400ms，500ms这样停顿下再请求下一个）来尽量使“请求频繁”的问题减小...
我用 smartdns 的 DoT 也遇到了这个问题... 解决方法可以是在 /etc/hotplug.d 下手动制造个trigger，在达成指定条件后重启smartdns
Updates: I see these and similar lines in all of mesh nodes **ONLY** after I click restart button on bat0mesh0 interface. ``` Fri Apr 5 19:12:16 2024 daemon.notice wpa_supplicant[1590]: Set...
`option mesh_rssi_threshold '1'` is my setup from luci, you can see what 1 means on luci. They can connect to each other when only using 802.11s mode. I do not...
So this question should be sent to the openwrt/openwrt? I do not see phy1-mesh0 is add to bat0 when router boot up...I will check if some commit break it.