PunkRa1n

@HeyImVitor I didn't asked how to open cmd as admin... This code switch into a new desktop in Win10. And if you combinate "CTRL + GUI +

Hi @genik70 thanks for the datapoints, I've written a WIP code. That will work. But I haven't figured out how to send the commands back correctly. I don't even know...

Hi, maybe you need update the new firmware, I've had the same issue, a new firmware was released 3 days ago https://raw.githubusercontent.com/makerbase-mks/MKS-DLC32/main/firmware/TS35/CNC/Normal/DLC32_CNC_V1.2.001_Normal_8M_H35_1009.bin you will see on the bord the "Laser"...

> @aroef Did you use the "SPINDLE" interface to connect to the laser? And what is the voltage/current of your laser need? The voltage works between 0.3V (1%) ...5V (100%)....

@aroef It works fine with TTL G to L and S to IN and how did you fixed it with homing? You didn't use the homing function, right? Bc I...

Hi @3Dangel  A better view of my wiring It works great $h don't work if you don't have a Z axis. But you can bypass it with $hy and...

Hi @3Dangel Thanks, that was the missing piece of information what I've needed, the laser mode. I didn't had much time for testing. The transformer don't destroy the tube. It...