PsychoRS

So can you confirm that this light comes with an ESP32 and not a mediatek controller?

> To my knowledge, right now the UDM/P or UXG-Pro use `/mnt/data` and UDR and UDM-SE use `/data`. Maybe the upcoming UniFi OS 2.0 update for UDM Base and UDM...

Updated my UDM-Base to latest Early-Access firmware (1.11.0-19) and now it's working like a charm.

Hi, I think I've found the solution to 100% replicate the stock firmware behaviour. First of all, I've recalculated min_power and max_power using the voltage info here. So, with my...

> Hi @syssi I have this light and this is the output of the `info` call: > > ``` > Model: yeelink.light.ceiling4 > Hardware version: MTK7697 > Firmware version: 1.6.6_0056...

Set your DHCP serverIP (of each VLAN) as a private reverse server on DNS Settings -> Private DNS Reverse Servers, and check "Use private reverse DNS resolvers" and "Enable reverse...

> > @PsychoRS thanks for the comments. I will see what I can find out, or if there is a way to actually adjust the fan speeds. > > OK,...

> @eatoff8 @PsychoRS How can you test this out? I would like to have it tested before pushing it to the main repo. I can if you can give me...

Nevermind, just changed id from 0x8689 to 0x8628.. PS: No, sorry, it's not working as expected, Fans slow down on pwnconfig test but never spin up again. ``` Testing pwm...

Yes, the fan never stops in my case. It just moves between 1200-750 rpm in a very narrow pwm_input range. And its an Arctic P12 PWM with a range of...