Prusa-Support

Thanks for reporting. As our developer mentioned, we are already working on this. For now, a potential workaround may be setting the router fixed on WPA2 (or WPA3 in a...

Prusa Link should remain a most basic printer interface on the local network, especially because it is hosted on the printer's motherboard itself. It is intentionally only equipped with very...

Hello! Thank you for your request, I passed this on to our devs for them to further review and possibly implement, in case of more info on this from our...

This is theoretically already possible but only when flashing the "core" Prusa Link image on [Raspberry Pi Zero W](https://help.prusa3d.com/guide/prusalink-and-prusa-connect-setup-mk3-s-_221744#304787) or [Raspberry Pi 3/4](https://help.prusa3d.com/guide/prusalink-prusa-connect-with-rpi-3-4-usb-mk2-5-s-mk3-s-_469341#470087). Setting a static IP is possible too...

Thank you for the suggestion. We got similar requests, such as requests for showing additional information while printing via Octoprint (#189) and for displaying a generic "serial connection" instead of...

Thanks for your feedback. The feature was supposedly tested in the possibly worst scenarios (described in https://github.com/prusa3d/Prusa-Firmware-Buddy/pull/1552) but there are known issues (described in the same Pull Request). A known...

Please give it a try with Prusa genuine parts (hotend, fans, design...) if you don't mind, and let us know if the issue is confirmed with the use of specific...

The problem may be concerning the faulty or misaligned thermistor. In the case of genuine Prusa hardware, I suggest reaching our Customer Support for an evaluation of the problem. https://help.prusa3d.com/article/customer-support_2287...

Thanks for the feedback. I see. A pulled thermistor connector or dust in the socket may affect the problem too. Reaching out to Customer Support is surely a good option...

@tomelm repositioning the heater and thermistor may have helped. Not sure about the tests with third-party components, the result would be difficult to predict because we mainly work with genuine...