Pavel Veider

Hello! I use this program quite a while now, so i took the time and translated it to Slovenian language, if it's usefull... thanks for your work! [slovenian.zip](https://github.com/zkemble/AVRDUDESS/files/4807701/slovenian.zip)

Oopss... i missed some, yep... I corrected those. i left those most "difficult" ones for the end and forgot... Word "Format" is exactly the same in Slovenian language, so i...

Yep. And it doesn't update lovelace anymore. Please fix it... it's very usefull card.

Exactly the same problem... i have it set to 60 minutes, so it can destroy a lot of my work. And, it seems that when this card is placed in...

OK, thanks for explanation. For now i just put icons of thermometer (quarter, half and full) for three filaments and i'll be fine. I'll explore some more on those icons...

Slower? Interesting, my experience is quite opposite: in original FW it can take up to 20 minutes from reset for temp and humidity to show up in HA, while in...

@irarkh : correct, i understood wrong. Now i tested my sensor: temperature display changes at intervals around one minute or so. In original FW this was indeed almost instant. I...

What do you run in esp32? Esphome, tasmota or any other fw?

Switch to tasmota. I’ve had esphome with 8 sensors and interval was pretty random. After esp32 reboot it could take up to 5 minutes (sometimes even more) to get first...

Yes, choose tasmota32 bluetooth. You can update via esphome’s website (enable website and update via OTA). After reboot you’ll have to connect to tasmota’s wifi (192.168.4.1] and set your wifi...