Pierre-33

I actually found about this project today, and I totally want to try that :) I'm new to the electronic part of the project, so it's probably going to be...

Hi, I'm having exactly the same issue with e0347c0 on an esp8266. After some test, it appears that it's because I use AsyncMqttClient 0.9.0 instead of the 0.8.2 packaged with...

> I was indeed using the version 0.9.0 of the AsyncMqttClient library. I have not tested with an older version and I'm still relying on my sledgehammer workaround resetting the...

> @bertmelis has developed a much more stable mqtt library (https://github.com/bertmelis/espMqttClient). It is long on my todo list to replace asyncmqtt with bert's library in homie. That sounds like a...

yes, that's what I do, but Homie Mqtt Client doesn't support "big" payload (my payload are actually quite small). That's why I upgrade it to 0.9 in the first place....

Thanks, that would be nice :) I live in France. But depending on your answer about the second part of my message, I might want to try the improvement I...

A little update on my side. I did some reading this week-end and now I know how to read the octocoupler pinout and manage to use one for another simpler...

> Am I correct to assume that you are on a beginner level in electrical engineering? Yes, you are totally right :) I purchased a book recently and having a...

> However, you might be right, the red wires are soldered on the PCB side. In this case it is totally fine: The consumption of the additional electronics is minimal,...

Just a quick message to tell do that I flashed the firmware yesterday and I'm pretty impressed with the setup process. I know it kind of come for free with...