PhilipTS

Yesterday I received a ME102H.31 and replaced the WBR3 with a ESP8266 based module with WThermostatBeca 1.24beta. The WiFi icon is flashing on the thermostat screen BUT the date/time are...

 @AlbertWeterings I see that next to D10 I have R43 ... you mention R34 and with my bad eyes I can't find R34 ... please help?

And to answer my own question ... i checked with my multi-meter and the point between D10 and R43 is connected to GPIO 14. So I connected a wire between...

@AlbertWeterings I have already destroyed 2 BHT-002s with my weak/bad soldering skills that I didn't think of taking many pictures. So no i don't have any with the module off....

@AlbertWeterings I don't really know what I am doing but I am trying. So I flashed Tasmota 9.1.0. Tasmota 10.1 would hang when I configured the TuyaMCU. I enabled weblog...

Have you seen this issue? https://github.com/klausahrenberg/WThermostatBeca/issues/17 It mentions that the relay state is not sent by the MCU and we need a hardware mob to get it. Have you figured...

@AlbertWeterings Just loaded WThermostat_1.0.1_alpha.bin and I can see the Heater property change to true/false in sync with the small flame. I can also here the relay click when we have...

@AlbertWeterings I don't know what you did but it looks like you fixed the below issue ??? !!! https://github.com/klausahrenberg/WThermostatBeca/issues/239 Will continue testing

Unfortunately issue 239 is not solved ...

Hello, I have a ME102H.31 thermostat that came with a WBR3 module that I swapped with an ESP module & with WThermostatBeca 1.24beta. I can confirm that I also have...