CityWrecker

Build Plate Adhesion - Per Object / Brim on/off per object

1

**Is your feature request related to a problem? Please describe.** (A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]) I'm always frustrated when...

Object cancelation doesn't properly recognize and label groups in Cura, producing random number of objects and no possibility to cancel.

5

Please see here. https://github.com/pedrolamas/klipper-preprocessor/issues/12 In Cura...... I have some groups/assemblies. If I want to cancel one ideally it should show as a single 'object' for cancelation, but this doesn't happen....

I'm using preprocessing through moonraker, not the Cura script. I have a mesh where upper layers are modified by an overlapping mesh. In Cura these overlapping meshes are not to...

Infill layer thickness removes skin edge support

2

**Application version** (The version of the application this issue occurs with.) current **Platform** (Information about the operating system the issue occurs on. Include at least the operating system and maybe...

Monotonic Zig-Zag possible?

5

**Is your feature request related to a problem? Please describe.** (A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]) Yes. As I go...

Please add macros for X-axis_twist_compensation

2

Please add macros for X-axis_twist_compensation https://github.com/Klipper3d/klipper/pull/6624#issuecomment-2420026334

Internal bridge (solid infill) density, flow, fan speed etc.

21

**Is your feature request related to a problem? Please describe.** A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] Yes, internal bridging for...

Arrow next to Z Thermal Adjust, indicating ascending vs descending temp.

5

### Requested feature: Simple idea. An arrow next to the Z Thermal Adjust (in the temp panel) that would indicate if the temp is moving up or down. The problem...