Phil-ibert

Results 7 comments of Phil-ibert

Z2M cannot connect to MQTT after adding a Lixee Zlinky and changing its name or its specific configuration

This morning, I found Z2M in a "Not connected to MQTT" error loop again, without touching anything. On the MQTT Broker side, there was a packet malformed error each time...

Z2M cannot connect to MQTT after adding a Lixee Zlinky and changing its name or its specific configuration

Hi! I am interested by this TIC enable feature that you are mentioning, as I am not familiar with it. Would you have a guide on how to enable/disable it...

Z2M cannot connect to MQTT after adding a Lixee Zlinky and changing its name or its specific configuration

Thank you very much for those information, I was able to confirm the issue with NJOURF+1 as you said. Hi @Koenkk, can you please point us towards what could cause...

Z2M cannot connect to MQTT after adding a Lixee Zlinky and changing its name or its specific configuration

What's weird is for just a decimal value to crash the whole MQTT connection. How can we instrument this ?

Z2M cannot connect to MQTT after adding a Lixee Zlinky and changing its name or its specific configuration

Anybody has knowledge or ways to instrument this ?

Z2M cannot connect to MQTT after adding a Lixee Zlinky and changing its name or its specific configuration

Hi This issue is still happening… Hello @Koenkk how could we help fixing this ? My knowledge is limited but I am willing to test :)

Z2M cannot connect to MQTT after adding a Lixee Zlinky and changing its name or its specific configuration

Removing an attribute that is supposed to return a value is not a solution but a workaround. It would be the same as telling someone "you have a car with...