Peter Christen

Yes you do understand correctly this. I understood that for implicit IO messaging always port 2222 should used for src and dest port, isnt it?

@CapXilinx: I did implement, what we discussed related to issue #157, the functionality of the stack should remain the same as before. There is no change in the port addressing...

@CapXilinx Hi Martin It is quite a while since we have been in touch. In the meantime I tested it with the Posix port as also with my new STM32...

@CapXilinx Hi Martin Thanks for your answer. Let me think about a little about that. Just for my understanding two questions: 1. When you are talking about port 2221, do...

@CapXilinx Hi Martin 1) I had a look using WireShark to the Forward open message - sent by ENIPExplorer: There I expect to see any address information, but I could...

@CapXilinx yes this is a very good proposal. Let me know when it would fit in time for you.

@CapXilinx Hi Martin I took the source code from the Hilscher Ethernet/IP Tool and added the possibility the change the IP port in the forward open request. Forward Open with...

Great! If I can support it, let mw know

Can you provide a more specific information about the issues with 'RPI Timer fix'? After vacation season I would have time to do some analysis.

I found an issue in cases where the elapsed time is higher than the RPI set up. This has been fixes. The implementation before was more proof of concept, sorry...