PetFra
PetFra
Hi, have you managed to use a "blank" command to turn a PhilipsHue light (or anything not managed via a BTicino actuator)? I have the same case here...
Ok after an afternoon of test and learn using this blueprint is possible: https://community.home-assistant.io/t/myhome-cen-commands/260345 The prerequisite is to set into MyHomeSuite a command to send a CEN+ event and use...
Ho thanks, is the classic Sonoff ZigBee 3.0 dongle as far as I remember is the original firmware on it. Would using the python script bypass the issue?
I think problem is I have Dongle P This is mine: https://amzn.eu/d/0d47x3yq and it says dongle P So I need to understand if I can make thread over it thanks...
Hi thanks! I’ll look into it! thank very much
I got the same issue but for a total different reason. Becasue HomeAssistant is quite reliable to me I blocked all the unecessary connection to the internet for IoT devices,...
Hi, I was actually thinking of intercepting the call to the cloud and give it back what it wants so it belives the cloud was connected. But I’m not expert...
> > same issue. > > Just a tip, a workaround is to disable AL when the light turns off and enable when turned on. Just be sure to set...
> > > > same issue. > > > > > > > > > Just a tip, a workaround is to disable AL when the light turns off and...
> To make it easier for the workaround, I created a "Run in sequence" step that turns off adaptive lighting (the main switch, not the integration itself), waits 500 ms,...