ParaAdBellum

I have a newly purchased TS101 (90W). I am experiencing similar symptom of iron rebooting while heating up on 140W Apple PD3.1 brick with EPR lead in 28v mode. This...

attaching a PD capture created using charger lab km003c and their windows software from here https://drive.google.com/drive/folders/1u63v7TAPZl0DohsziWwOkfRA4Vuk6J1Q KM003s was inserted between TS101 and Apple 140w power brick. [foo.zip](https://github.com/Ralim/IronOS/files/13929961/foo.zip) it appears to...

I've collected a pd3.1 capture with ts101 running stock firmware where issue is not observed. I have a conjecture as to what's going one -- please observe two screenshots. First...

I've ordered a PinecilV2 a week ago. I'll see if issue reproduces with PinecilV2 once it arrives here (shipping from China).

Also, will be happy to try out a patch.. either pre-built or I can build one myself. thanks

>I tried all the freaking USB C cables I have, and I found out just some of them are able to negotiate (and run!) 20v, and just ONE will actually...

> Hello, > > I`ll give my input on this topic as well since I think I managed to encounter this problem too. I have the Baseus 140W GaN Charger...

> But with the original cable (Basesu cable) which works without a problem, I can see that the iron is running at 28V. Shouldn't this cause the same error? Not...

@Ralim I've flashed provided firmware to both Ts101 and pinecilV2 and they both act about the same.. high rates of crashes while heating.

can you see if the following diff resolves your problem? it does for me: in /var/lib/homebridge --- ./node_modules/homebridge-aranet4/dist/aranet.js- 2022-11-05 10:52:28.866609648 -0700 +++ ./node_modules/homebridge-aranet4/dist/aranet.js 2023-05-20 10:36:14.530192577 -0700 @@ -18,7 +18,8 @@...