flight_review Add warning GPS Jamming

According to link

GPS Noise & Jamming The GPS Noise & Jamming plot is useful to check for GPS signal interferences and jamming. The jamming indicator should be around or below 40. Values around 80 or higher are too high and the setup must be inspected.

It would be nice that graph shows some kind of warning that values are to hight.

Sep 02 '20 17:09 MartinStokelj

Can you reference the documentation for the relevant receiver?

Oct 27 '20 15:10 dagar

We are using uBlox NEO-M8N modul core of GNSS receiver made by our company. On some drones we see this bellow 40 on some we have 250. For this with 250 we made shielding on cables and now we are around 150. This is high when we connect IP camera. Without ethernet connection cables the noise is low.

Oct 27 '20 17:10 MartinStokelj

We are using uBlox NEO-M8N modul core of GNSS receiver made by our company. On some drones we see this bellow 40 on some we have 250. For this with 250 we made shielding on cables and now we are around 150. This is high when we connect IP camera. Without ethernet connection cables the noise is low.

My interpretation was you can only interpret it as a relative metric. From the ublox 8 protocol specification.

Screenshot from 2020-10-27 17-14-47

Oct 27 '20 21:10 dagar

thanks for this info. I think it would be a good feature if graphs shows some kind of warning if values are to high, for example:

to high GPS noise
to high vibrations
... So you can see sooner what is wrong with the platform when checking ulog file

Oct 28 '20 07:10 MartinStokelj