Darren Williams

Hi, unfortunately I do not know much about docker at all so any help would be appreciated. To get around the problem with no menus etc, could you try visiting:...

I have just put two cards in the first one pictured in Jeff's post and get this: ``` root@raspberrypi:~# lspci 00:00.0 PCI bridge: Broadcom Limited Device 2711 (rev 20) 01:00.0...

I have tried the one dlednik recommended, this is the one for us guys!! On my Amazon it is listed as a different brand but looks like its the same...

@markus-k They work in the one in my above post, the two port one is now being scrapped in favor of that one which seems to be working perfectly.

@markus-k Thanks, I want at least three ports anyway.

This should work just fine once the intel driver is compiled in: root@raspberrypi:~# lspci 00:00.0 PCI bridge: Broadcom Limited Device 2711 (rev 20) 01:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit...

A little more with mtu 9000: iperf -c 192.168.35.11 ------------------------------------------------------------ Client connecting to 192.168.35.11, TCP port 5001 TCP window size: 325 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.35.10 port 43576...

From the guide: sas2flsh -o -f 2118it.bin -b mptsas2.rom (sas2flsh -o -f 2118it.bin if OptionROM is not needed) I think if you flashed it without the OptionROM, I use that...

I've managed to get an LSI 9211-8i recognised: pi@raspberrypi:~ $ sudo lspci -v 00:00.0 PCI bridge: Broadcom Limited Device 2711 (rev 20) (prog-if 00 [Normal decode]) Flags: bus master, fast...

Same here, maybe I should have looked here first at the unanswered post going back to may.