OpenWRT-fanboy

Same with Xiaomi Redmi AX6000. It was added as a default to Filogic devices, even though some (most?) don't have Aquantia. When I roll my own with the firmware selector,...

@systemcrash Thanks for taking this up. I tested your new wireless.js on Linksys MX8500 and it works as expected. The 6ghz settings (Qualcomm Atheros QCN6024/9024/9074 802.11ax) now only allow WPA3...

> > Management Frame Protection must be set to Required or the radio won't come up > > @blogic: you wrote: just following this on the side ... mac80211.sh will...

> By the sounds of things, I can go ahead and add a fix. It should help in new deployments, in any case. 24 is probably a good point to...

ping @systemcrash Can we get this integrated (and backported)? As 6G becomes more prevalent, more and more Openwrt users are having problems bringing up the radio because of inadvertent misconfiguration.

> Looks like it'll hang attempting to run patches again after issuing `/etc/init.d/network restart`. phy will break until reboot in this case. Would this fix? Create a variable = 0....

> > @testuser7 Is there any way to avoid adding yet another `cmdline` hack that we then have to carry essentially forever? > > Well, there is a way to...