MattP

Yes, that would be great. I have time to test it. I personally only have access to a CM5 and CM5 Lite at the moment, if that makes a difference.

Hi, just following up to see whether you have a copy I can test and how I can obtain it. Thanks again.

Tested in all OSs where I previously had issues and can confirm that all now appear as expected, including both those with mixed RGB/RGBA elements (previously black artifacts) and no...

Perfect, thanks again for your help.

Have you tried to replace the included .dtb file with the d0 firmware file and updated the config.txt file to reference it? Once you’ve tried that, you may also want...

Start by copying the appropriate firmware boot file to replace the rpi5 dtb file. I use the cm5io file selected. Add a line in config.txt to explicitly use that file,...

The new CM5 units are finally shipping and my 4GB Ram, 32GB eMMC is posting the same Async error as the 2GB pi5 units when trying to run PINN. Do...

Great! Thanks for all the work you put in

So far, I have been able to install PINN on an NVME attached to the CM4 with 3.9.2 installed and perform the update, then switch the CM4 out with a...

My official Raspberry Pi CM5 board just arrived and I will revise this to say that I don't think DWC2 is necessary. Older CM4 boards work with the CM5, but...