NovTechEng

Well I made some progress. Found out how to enable debug messages in the Ethernet driver by compiling a debug.ffu in visual studio and uncommenting some lines in dbg.h for...

Ok, so all those features are enabled in my OEMInput.xml as I am using the HummingBoardEdge_iMX6S build. Despite this, none of them are working. I cant connect to either the...

Alright so I double checked the ethernet and saw that although it could sucessfully ping, I was dropping a lot of packets due to a poor ethernet clock signal. I...

This page on Remote Display https://docs.microsoft.com/en-us/windows/iot-core/manage-your-device/remotedisplay suggests that my issue could be related to the fact that I have no display connected to the device. To fix this it says...

I was previously configuring headless mode by including the line `DEFINE HEADLESS = TRUE` in my .dsc file (UEFI). I have since removed this line and believe I am no...

Unfortunately I am not having the same behavior. With the Remote Display enabled or disabled, the screenshot feature displays a blank rectangle. I also tried connecting to the Remote Client...

I do not have `CONFIG_HEADLESS = TRUE` in my .dsc file for the UEFI that I am using, yet the Display Resolution according to the Device Portal is 640x480 (64Hz)....

I am pretty sure the GOP driver is being loaded. When I first removed the Headless config from my .dsc file the board would crash when loading that driver (I...

Awesome, that definitely helped. I now have the proper resolution on the Device Portal and the Screenshot function is essentially working (Like you mentioned earlier, the first screenshot is blank....