NiklasVoigt

Which firmware did you flashed ?

Works like a charm! Please add HK ECO-6 50W in the list of working devices. -Closed

The HK Eco6 shares a USB Port too. Look here: http://transistor-man.com/echo-6.html I've flashed through the PCB directly as shown in the Pictures of the Manual. Before that i testet everyone...

I dont think that you can flash through the USB port

This would be a nice feature! Please add this! The HK ECO SIX 5A (50W) can do this by default software

> Try this one: > > ``` > if (!config.uploadOnSave) return; > ``` Works!

works great on V2!

same with v2, tested with your package from discord 130|root@pigeon_wm170_gls:/ # dji-moonlight-shim WARNING: linker: ./dji-moonlight-shim: unsupported flags DT_FLAGS_1=0x8000001 2023-01-16 12:53:55.863 1430 1431 DUSS26 :DISPSRVE: icc peek failed for 0 time...

> > same with v2, tested with your package from discord > > 130|root@pigeon_wm170_gls:/ # dji-moonlight-shim WARNING: linker: ./dji-moonlight-shim: unsupported flags DT_FLAGS_1=0x8000001 2023-01-16 12:53:55.863 1430 1431 DUSS26 :DISPSRVE: icc peek...

oh haha, i only followed your readme. with sunshine started it works really nice, really hard to tell how high the latency is.. somewhere < 10ms