NiiXXiiN

Results 5 comments of NiiXXiiN

Error after latest update - Missing Speed Sensors

After 2 or 3 attempts to refresh they do. Even even if shutdown the app and restart it it has the same behavior.

FanControl's UI loves to show up outside any of my screens.

Same issue here with me. Two monitors main landscape and secondary vertical. I use fan control on my vertical screen and when i restart my pc it is always off...

Pause printing does not resume correctly

I dont know if this is correct but maybe use G90 (use absolute coordinates) after the pause.

Printer reacts late to torture test commands. Especially at low speeds.

I think you might need a force interrupt command to stop current action and update. The only [video](https://www.youtube.com/watch?v=HJpfO8XifqI&ab_channel=PrintEngineering) i found (12mins long i know..) is on a kind of relevant...

superslicer 2.5.59.2 vs 2.5.60.0 flow differences on top fill and solid infill + supporting dense layer percentage

First of all, thanks for the reply. For the amount of plastic of infill and top fill. I've been using extrusion multiplier 0.85 to 0.88 for the last 3 years...