Christian Kunis

This issue is made worse by the fact that the anti-squish screw is even farther from the tensioner spring than the filament path is from the tensioner, so the torsion...

1) Make sure that the camera was not automatically disabled by one of the updates, either by using `raspi-config` or manually editing the `/boot/config.txt` file. 2) There is a known...

I also support this change because I had similar issues with the mini-SB and I ended up fixing it by adding a shim washer to the mating surface that @Matszwe02...

> Hello, we are experiencing the same problem. Lates NC version, Debian Stable, LDAP Users to MS AD. Users are recieving every couple minutes mails with changes groups. In my...

I am seeing the same issue on 1.32.3 (1.32/stable), the issue seems to fix itself immediately when I simply rollback the nodes to 1.31.7 (1.31/stable) using the following: ``` sudo...

I have confirmed that the issue still existed when upgrading from 1.31 to 1.32, and when I tried upgrading 1.31 to 1.33 (after reverting to 1.31 and running that version...