MrBLJ

Can confirm this is happening as well : polling is set to default. The behavior is different between my model 3 and model Y. Model 3 (binary sensor _online)_ ...

Same behavior on my end. Thing is : with polling enabled my model Y is never going to sleep, even with the interval set to 6000. This is not the...

I'm faced with the exact same issue. I've tried using every server listed, but no luck so far. Is there a specific one for each country ? I'm from France,...

> Here's a flow that seems to work well for me: Thanks for the suggestion. I tried with this flow, but unfortunately the issue persists.

Wow, thanks for you prompt feedback ! You're right, D1 is a 8266 board. For what it's worth, I've successfully used a CC1101 module with esphome on this board, with...

Thanks a lot for those resources, this is most helpful. I have an _okay_ understanding with what's going on, the downside being that I have close to zero knowledge in...

Continuing my investigation. I've tried : - Using a different CC1101 module (same model). - Using a different board (D1 mini as well). - Using a different ESP8266 board (Nodemcu...

Update : the plot thickens. I tried using the ESP as a remote for the the shutter with the current state of things : nope, did not work. ~~The strange...

I came back to this after a while, and followed @ftpproxy's advice. Unfortunately, the issue remains the same. @ftpproxy, could you specify the type of emitter you're using ?

Hey @grigorgeous . Thanks a lot for your feedback ! I went the same way and ordered an esp32 which I received yesterday. I'll try soldering the wires directly, since...