Monra124

I have the same problem, I have the ebb with usb communication plus the two power cables, when I turn it on it tells me that PIN PB13 is reserved...

> > I have the same problem, I have the ebb with usb communication plus the two power cables, when I turn it on it tells me that PIN PB13...

> Then it can only be a config problem... my configs: [config-20240430-173109.zip](https://github.com/bigtreetech/EBB/files/15167182/config-20240430-173109.zip) my menuconfigs: E3EZ  EBB36  > > Firmware is Armbian 24.2.3 Bookworm with Linux 6.1.79-legacy-sun50iw9-btt Thanks. I...

I put an older version of the EBB CAN frimware, the error did not come out, I asked to update, it updates everything but the EBB, I downloaded the latest...

I updated the firm from menuconfig and the same error comes up again:  With the configuration: 

The ebb 36 can is v1.2. The firm I install is the one they have on github v1.1 since it is the same as v1.2. You won't have the firm...

Ok, so you have it connected by CAN, instead of USB?

The board sees the EBB36. I've tried building the firmware, I've even tried installing RATOS from its installer and the same thing always ends up happening to me, it's as...

Good morning. There is no way, no matter what I do the same result, I built the firmware and flashed it in dfu mode, it did it correctly, the result...

> Can you pls upload your Klipper configs for EBB & E3EZ? I don't have everything done, as I first tried to link the E3EZ board with the EBB and...