MoesMo

I tried to sort out the ports myself, it turned out that they match. That is, everything works but there is no GYRO and ACC. When you turn it on...

I'm talking about my attempts on this flight controller. Reassigning board contacts did not help, in flywhoof411 (inav there are no drivers for this acc \ gyro, I tried to...

Hello, thanks for your help! Weird, I've added this gyro before and it didn't work for me. I'll try again next week. If you have a compiled firmware file for...

> Похоже, что JHEMCU начал предоставлять прошивку (Inav) для этой платы, только двоичный код, без исходного кода (или модификации): [https://github.com/jhemcu/FC-ESC-Firmware .](https://github.com/jhemcu/FC-ESC-Firmware) # set board align_board_roll = -1800 Allowed range: -1800...

Good night, I finally got to this controller. The meaning is the same on betaflight, when switching to the glider / airplane mode, only the motor works - the servo...

https://youtu.be/8VkhtbEG7fg @p-fpv Pavel it works, though again not everything, but it's already cool!

@Geka-electron @trogalko @p-fpv @pavel0001 @MartinGiersberg Hello guys, I tested uart 1 uart 2 ibus, gps works, can any of you check on the firmware from @p-fpv Sbus, Crossfire. And I...