RJModules

RJModules copied to clipboard

going from 0/5 -5/5

Miserlou

Thank you so much for making ACID !!

4

Sorry to spam here, the subject says it all, many thx for ACID. it's hands down the most exciting oscillator module I discovered in a long while. Keep it up!...

77377

issue

2

Hello thanks for your modules using ACID there is a problem: the first time is inserted in rack, don´t have envelope out until the PLUCK rotary is moved. after, all...

Jairodallos

Some modules do not render their display component in the module browser. For example, `EssEff`:  As you can see, the display component is missing. Same for `ChordSeq` and all...

cschol

RJModules (v0.5.0): voltages aren't compliant!

4

Hi, I report you an issue about non-compliant voltages on outputs of some modules I've tested (Supersaw and BPM): these voltages are too high/over limits, regardling Eurorack Voltage Standards document,...

DomiKamu

EssEff/ChordSeq: Font size issues

5

Font issues ~on a 4K display on Windows 10~ **on all platforms** for `EssEff` and `ChordSeq`: 

cschol

Widener - missing knob and filter when rotating knob past 0

1

added RJModels via website to Rack 0.6.2c (that could already be the issue) Widener module had a missing width knob (cv in worked). When using filter knob, there is a...

geslotencirkel

Using an external clock (Clocked by Impromptu). I have the reset output on the clock generator plugged into the reset input on ChordSeq. When I stop the clock, reset, and...

adsmz

I love the sound of supersaw, but it's nearly impossible to control the pitch. There's no 1V/oct input, so you need to use the pitch control. As soon as you...

joopvdl

Described here: https://www.facebook.com/groups/2035785263299933/permalink/2127072777504514/

Miserlou