Nara Clerc comments

Repositories
Issues
Comments

Results 4 comments of


                                            Nara Clerc

Cannot run code: possibly node version issue?

@ShahinHaque97 I didn't, however, I found that the [stm32flash source code](https://sourceforge.net/p/stm32flash/code/ci/master/tree/) could be modified to handle STM32WL series MCUs. The file [dev_table.c](https://sourceforge.net/p/stm32flash/code/ci/master/tree/dev_table.c) contains the settings for each MCU, but the...

Raspberry Pi CM4 on BalenaOS consumes too much power after shutting down

Hi, That's RaspiOS buster armhf lite, release 2021-05-07, Linux kernel 5.10.17

Raspberry Pi CM4 on BalenaOS consumes too much power after shutting down

This has been observed on the TOFU board by Oratek. The setup was identical for both trials, same CM4, and same TOFU board, only the OS changed

Raspberry Pi CM4 on BalenaOS consumes too much power after shutting down

Yes exactly, that is raspberrypicm4-ioboard-2.85.2+rev3-v12.10.10