Mike-FUT

[rasphone.txt](https://github.com/lipkau/PsIni/files/5113748/rasphone.txt) File is attached (renamed to .txt and internal data replaced with dummys). These are the commands I'm using which basically "destroy" the file: ``` $iniPath = "C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk" $ini =...

I'm not understanding this request. MK4S with MMU3 here with latest release firmware on MK4S and MMU3. When I select the MK4S-MMU3 printer profile in PrusaSlicer the mentioned screen from...

Also, this can be now changed (including spool join) from Web or Prusa Slicer via Prusa Connect.

@neophyl, thank you, seems I'm not good in finding things here at Github. But since this feature request seems to be out there for five years now I might probably...

**MK4S / 6.1.3** My first layers look the same. Doesn't matter if I use Prusament PETG, Pruasament PLA or any other non-Prusa filament. Flow calibration doesn't improve it. Below is...

I checked what our friends from China do in their slicer since it's based on Prusa Slicer to my knowledge: You also have to save filaments there to modify multiple...

Not sure if my issue fits here, but let me try to explain. MK4S + MMU3, both latest release firmware as of 2024-09-20. When I send a standard "single-extruder" print...