Mictronics

Default parameters from last event are hardcoded in eph2sbf: ``` // TO DO: Specify scheduled leap seconds in command options // 2016/12/31 (Sat) -> WNlsf = 1929, DN = 7...

I assume with device you mean a mobile. Are you aware that on modern mobile device GPS is only one of several services to obtain the device location. Also, real...

> fw_setenv xo_correction 40000000 This will not turn off XO correction but overwrites the factory calibration value of the oscillator. Keep in mind: The output frequency will be generated by...

In u-center open message view (F9), check if your receiver supports UBX-RXM-MEASX message. In case yes, check that MP is indicated low or medium for the simulated satellites. When MP...

  Code: https://github.com/Mictronics/multi-sdr-gps-sim Setup PlutoSdr (with OCXO) -> 10dB attenuator -> ublox M8T Commandline: `gps-sim -g-80 -f -l -12.0,-16.0,400 -e rinex2.gz -snow -v --radio=plutosdr` Ephemeris and almanac for all...

Images are not shown.

``` gps-sim Executable_Creation: [image: image.png] running command: [image: image.png] TUI terminal Screenshots: [image: image.png] [image: image.png] [image: image.png] [image: image.png] ``` No images.... > can you help me out faster,...

Received? No. What's the problem with attaching them to this PR? Simple copy and past or upload works for me. Maybe you stop quote reply.

You just reply to notification Emails from Github, right? Did you check where that goes? I guess you can send your images a hundred times, they will not care. m(

Specified for GPS is a guaranteed reception power level of -136dBm on every place on earth.