Michi202020

Id3 Battery withe 12 cells

4

Hello, I am new hear in Github. My English is not the best but I hope you understand me. I have 14 peases from this block and I will create...

SOC with PZEM-017

8

Hello again, it is possible that we can the soc calculation direct on the ESP32 controller for the PZEM-017. He can not make it self. What he can is Voltage,...

Integrated VW ID3 MEB CMU Slave

3

Hello Stuart, i used many id 3 Battery and i have also the original CMU from VW and i see that the can bus is hacked. See here: https://github.com/anikrooz/housebatt https://github.com/Tom-evnut/VW-bms/tree/master/VWBMSV2...

All in One V490 Balancing function

2

Hello Stuart, (All in one version 490) I would like to understand exactly how balancing works. Firstly, it is possible to set a global voltage, e.g. 4150mV. If this is...

Discharge also a curve for amps go down

6

Hello all, I have a question in my charge config I have a charge curve for go down withe the Amps near the max voltage. Can I also make this...

Upload Config but Failed to save settings

13

Hello Stuart, i have the problem that i can not restore my backup config. I have upload your last 3 Firmware from 27.12.2023 but in all i can not restore...

Maximum All in One V490

10

Hello Staurt, what is the maximum of All in one V490 on one Controller. I have a LTO Storage and i need 40 pcs from this on one Controller can...

Good day, I now have about 10 pieces of 48v MEB blocks equipped with their own relay and fuse, but when I had a problem, for example, when one battery...