Michi202020

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.aliexpress.com/item/1005004659359322.html&ved=2ahUKEwjnvIS0_dn6AhWmW_EDHa7CCs8QFnoECCEQAQ&usg=AOvVaw3vzdVZ5WfsjUMQCg2stEPV

That's right but is this not easyer that you ask from the meter the kWh and scale this in soc. For example the battery what do you install is 20...

Hello Stuart, Yes I mean the original vw bms withe can bus 500kbs See picture. The canbus you can find the link in my first question. 

Sorry again, For understand I install your controller and if is install than I can say in the softer that I used the 4.4 or 4.9 Board or the vw...

Hello Stuart, my LTO pack have per cell 2,1 to 2,6v and its work good. Its round about 48v pack and this is What i used 40 Peace from the...

Hello Stuart, I think it also but how can I do this. It is possible that we can connect 2 or more controllers over the rs485 for calculation and push...

Hello Stuart I am again, can you say me what can bus adress do you programming in your code and can you say where is the pos in script for...

> Hi Michael. Connecting two controllers to the same CANBUS isn't going to work, there are just too many cells for the DIYBMS system to handle in 1 controller. Hello...

Hy Stuart, ok I understand. In this case I make a can Bus hob and use 2 controller on one victron. I have create a controller withe 3 can bus...

Hy many thanks for this code. I will test it next week and I will give you a feedback. I have also create a can bus hub that I can...