i2c-moisture-sensor
i2c-moisture-sensor copied to clipboard
Miceuz
I2C based soil moisture sensor
The [I2C register map](https://github.com/Miceuz/i2c-moisture-sensor#i2c-protocol) does not define the data format, and the listed examples use different ways of calculating them. E.g., the [example by Daniel Tamm and Jasper Wallace](https://github.com/Miceuz/i2c-moisture-sensor#raspberry-pi-examples) simply...
Hi I realize this is not trivial. It occurred to me that if you did a version with a ESP32 It could run https://docs.openmqttgateway.com/ And use LoRa mesh (not LoRaWAN)...
Hello, With RAK811 module, It support only writing data to registry , not directly on the devise (they told me it's not standard to write directly on the devise) Do...
I am developing a system which requires soil moisture sensing for soil that's only 4cm/5cm deep. The current size of sensor is too long, so I have used the schematic...
Hi I think it would would be great to have [Qwiic connectors](https://www.sparkfun.com/qwiic) as an option for indoor use. Since it was space on the PCB to add this with only...
Hi, Could you look on that threat https://github.com/Apollon77/I2CSoilMoistureSensor/issues/14 Also haw to block address sensor change when deepsleep and power is from ESP GPIO 3.3V. And also I am attachin a...
