Marcin Gajda
Marcin Gajda
I had this yesterday... Looks like it is like a wave ,and periodic :)
You could try another @Egyras project: https://github.com/Egyras/Panasonic_GUI
If you have CZ-NS5P you should not turn on Optional PCB emulation in Heishamon ! This is how to do it, you have to shortcut/open proper terminals on CZ-NS5P: 
Yes , it should be called Max. Dury ( acc manual) , and be in HEX values ,then would be more intuitive...
> I will take a look in the docs for the bytes I meant. But something just was strange. On my pump it is above 100 decimal. That is why...
Any PR are welcome , @Egyras is an owner ,and accepting them.
I also permanently requesting for such feature ( possibity to use GPIO ,as a state ,at least for OptionalPCB controls). would be implemented either directly , or by rules (...
@IgorYbema , i don't know if i understand your question corectly , but idea is to drive devices like zone pumps diectly from heishamon ( with act like optional PCB)...
Also default optionalPCB command gives compressor off as default :) And byte #116, can someone check how it behaves when there is only one zone ? Is it only zone...
There are already WH-MDC05J3E5 and WH-MDC07J3E5 with the same situation