Marcin Gajda
Marcin Gajda
Move this part to automations.yaml , there it is possible to add delay.
@trsqr , you can ask ( or dream) for a lot of posibilities , starting from sendin commands , drawing charts with analises ect :) But orginally this was the...
First ,we are not Heat Pomps designers , and only they know for what their project is like this :) Such data provides HP ,and such data are also present...
Yes :) In bottom right corner of This you have a termistor.
Yes ,it can be moved to room. You need two wires beetween that controller and HP mainboard.
No , only this two wires. ( power and data are in them).
But if you have external thermostat maybe it is better , since this controler has also resolution 1 deg so at least 1 deg have to be temp.lower to turn...
I still thinking ,that CZ-TAW1 should be present if possible ,that is why this device should be in the middle ,also to control what kind of informations Panasonic webpage receives....
Ok , another feature : maintenance of errors... Like sending email/sms with code error , additional GPIO with will close ( to send a signal to external alarm ect).
I already have some "genereted " by me like: H91 - just remove the shortcut or thermic protection ,and probably swith the external heater. after 60s error apear. H76 -...