Maxym77

no mqtt motion messages? solved ! no app working after hack? solved!

5

Hi, after some hours of test i have found this two solutions for this problems: 1) only online-offline messages in mqtt (no motions messages) 2) orignal app on phone won't...

human_start and human_stop WORK !!!

11

mmm i have simply inverted human_stop with human_start here: http://xxxxx:8080/index.html?page=mqtt works perfetct!!!! :D the cam send mqtt human_start on detection and after 40 seconds send human_stop i'm genius ? the...

problem with infinisolar sp24 twin

5

Hi, when i click "connect" in /dev hidraw0 there is no data from inverter.... you can help me? Oct 26 17:06:20 energiadomestica mtp-probe: bus: 1, device: 35 was not an...

PI18: warning0 Command XXXX was rejected

4

hi! i have found my inverter is an PI18. Command as this: mpp-solar -p /dev/hidraw1 -P PI18 -c FLAG Command: FLAG - Query enable/disable flag status ------------------------------------------------------------ Parameter Value Unit...

parallel bms ... how to read all bms with only one connection ?

1

Hi all, i have 3 of this bms , i can read the data with this library but i can read only 1 bms. is possible to read the others...

error on command sudo ./inverterctl --device usb --verbose set-max-charge-voltage 54.2 54.0

9

Hi my inverter is this: infinisolar https://www.solarpower24.it/negozio/inverter/inverter-hybrid/sp24-infinisolar-v-iv-twin-6kw-48v-inverter-solare-ibrido-off-grid-isola/ Have PI18 protocol. I suppose the "," character for "^S015MCHGVmmm,nnn" have problem with CRC calculation. sudo ./inverterctl --device usb --verbose set-max-charge-voltage 54.2 54.0...