Matthew

I am running Windows but I found this page while I too wondered why I was getting Firewall requests when I launched the application. I think I've worked it out,...

Bootloader is identical on both devices. I left the bootloader alone. This is exclusively fixed by replacing the firmware for some reason..

Yep it works fine without grabbing the start4x and fixup4 on 5 devices for me too.. this 6th device it didn't.. I think this might be a firmware bug. I'm...

>What firmware? It's a bootloader issue. It's getting past the bootloader and it's crashing during the kernel. Raspberry Pi has both bootloader and firmware. The bootloader (which is baked into...

>This is with the identical power supply too. Already tried the same power supply.. I'm not seeing any throttled. I am running motioneyeOS on this board and the other 5...

Finished my debugging. Firmware: < 17 September 2020 - No Boot => 28 September 2020 - Works https://github.com/raspberrypi/firmware/commit/f0eab3a24f42c06fb6f2360140a00873c2793b1f dev20201026 contains firmware Jul 17 2020.. therefore dev20201026 may not run on...

[Updated Pi Boot.zip](https://github.com/ccrisan/motioneyeos/files/6796157/Updated.Pi.Boot.zip) Here are the files you can replace in /boot (accessible from Windows as D:\ usually as it's a FAT partition) to ensure you're running the latest and...

It rebooted after a while but : [root@MotionEye log]# vcgencmd measure_temp temp=57.0'C [root@MotionEye log]# vcgencmd get_throttled throttled=0x0 [root@MotionEye log]# vcgencmd bootloader_version Apr 29 2021 17:11:25 version c2f8c388c4ee37ad709ace403467d163e8dd91ce (release) timestamp 1619712685...

With or without OMX?

Just crashed and rebooted again.. * Camera 1 (Pi Zero W Network Camera, MotionEyeOS 20200606, 800x600) (OMX) * Camera 2 (Pi 4B 4GB, Direct Attached Pi Camera V2.1, 1600x1200) (Non...