Marvo2011

With --debug I can see that the IPs can found. But it says: `WARNING: '' is not a valid IPv4 or IPv6 address` ``` WARNING: '' is not a valid...

> Charging: bv: current battery voltage maxcv: MAX_CELL_VOLTAGE mbv: max battery voltage = mcv * cell count lcv: lowest cell voltage hcv: highest cell voltage cvl: charge voltage limit x:...

@dropax have I right understand that x should "the max cell difference for balancing start" from the BMS Setting? For my example it is only 0.005V I'd now if the...

@dropax I have created a simple dbus dummy service to test this. https://github.com/Marvo2011/dbus-optimized-cvl/blob/main/optimized-cvl.py Your logic starts at line 98, with `cat /data/etc/dbus-optimized-cvl/optimized-cvl_error.log` you can debug the calculated voltage limit. For...

@dropax I think with MPPTs it works much better than with a MultiPlus (In this first test without feed-in and fixed 5A) 

@dropax - Seams a "natural limit", my BMS can only disconnect the - pole over a relay, and it does it at 3.65V - I have log the battery power,...

@smagicld can you help here? We need the registers for "max charge current" and "max discharge current". Many thanks.

@smagicld Many thanks for your response, we would to read this fields over TTL/RS232/UART. Can you help us with the registers we have to read?

@Louisvdw Does it help you ?

Any news to this? I want to get access to certificates (and users) from the API. Looks that is planed for 23.7?