MarkRoks

Hello, After some further research, within Node-Red, I found out that it is in "Hue Group control" within Huemagic. If the same command is sent to several luminaires in a...

Hello, I edited the above and then tested some. Unfortunately, I kept getting the mentioned error when I directed the group, as before. In short, I will have to wait...

Hello, You're right! I forgot to restart Node-Red. I've changed line 122 once a time and give it a restart. After that the group command works again! Thanks a lot!...

Hello, The problem, which until now still occurred with the Hue groups (no reaction), now also occurs with the individual control of Hue lamps. They also now do not respond...

Hi Michael, What I would like to do (and has always worked) is to send a self-determined "flow temperature" to the boiler. This is determined by a tool (in Node-Red),...

Hello michael, Maybe I didn't explain it enough. This is because it concerns the values ​​to be adjusted; - Selected flow temperature - Heating temperature Where the "heating temperature" is...

Hey, Managing the selected flow temperature arose from the fact that it turned out to be adjustable within EMS-ESP, just like the heating temperature. In this way I made my...

Hey, After some research, I found out about the heating temperature. It was noticed that the 2 available thermostats (Nefit and Bosch) work differently compared to each other. Since I...