Marcel67921

Could you please provide the configuration on the TinyBee motherboard for the Marlin-2.1.2.1 . I would add the data for setting the board size, limits and speeds. I'm not an...

Thank you, hopefully it will be possible in the future. ---------- Původní e-mail ---------- Od: PanosPetrou ***@***.***> Komu: makerbase-mks/MKS-TinyBee ***@***.***> Kopie: Marcel67921 ***@***.***>, Author ***@***.*** com> Datum: 5. 12. 2023...

[Configuration.txt](https://github.com/makerbase-mks/MKS-TinyBee/files/13467666/Configuration.txt) [Configuration_adv.txt](https://github.com/makerbase-mks/MKS-TinyBee/files/13467667/Configuration_adv.txt)

do you have the wires of the runout sensor connector connected to the board well? I had to switch them according to the plate. - red wire + - black...

Hello, check the wiring . + to +, Gnd to Gnd and Signal to Signal. Runout sensors differ in the connection of the connector. Best regards. ---------- Původní e-mail ----------...


S GND +5V