Manuel
Manuel
Hi Guys, I just finished my snappy 3.1 and its an amazing machine. However, i have some bad vibrations when the x axis is moving. So bad in fact, that...
Hi Im having trouble putting all the cables trough the holes. Some Cables are thicker etc. Could you make the holes bigger ? I would guess: 2,5 mm left and...
As you can see the filament is escaping the idler to the side. This leads to the phenomena that there is no more extrusion taking place and the print is...
Hi How can i query the status of the plugin. I fear it does not work. I secured my haproxy with authentication. How can i supply this with netcat ?...
Hi On github: plugins: filament: pin: XX On octoprint plugins website: octoprint_filament: pin: XX bounce: 400 Which is correct: octoprint_filament or filament ?? Thanks
Hi guys, I managed to get the SD-Card-Reader working with a Vm Solution just like @Menchen did with the bluetooth. The SD-Card is ready for use under 10 seconds. Its...
https://www.amazon.de/CSL-WLAN-Standards-Protected-Infrastruktur-Netz-Status-LED/dp/B01E2J5XDI/ref=sr_1_11?ie=UTF8&qid=1513938946&sr=8-11&keywords=5ghz+wlan+stick This device is supported :-) Thanks a lot!
I'm happy to report, that the this driver works with: CSL - AC450 WLAN Dual Band Stick | 433 MBit/s | 2,4 GHz / 5 GHz it also work with...
Hi OVH, Thank you soo much for this repo and your work! We need to harden down Debian an as there are no STIGs this repo is one of my...
Hi Foks, EA has released the games on Steam now. I got the games installed but they dont run as they dont draw the picture to the screen. Nonetheless they...