MallocArray

vmware_guest, existing VM, and state: powered-on skips other parameters

2

##### SUMMARY If a VM exists and vmware_guest is used to modify parameters, such as customization, along with state: powered-on, the customization is not applied and no warning message is...

VM Swap File Location

4

##### SUMMARY In the Host Configure tab under Virtual Machines>Swap File Location the location of VM Swap can be changed to "Virtual Machine Directory" or "Use a specific datastore" There...

Module to mange vCenter Global Permissions

8

##### SUMMARY There are existing modules for managing permissions at the vCenter and lower levels, but this module does not appear to support Global Permissions as seen in the vCenter...

##### Description There does not appear to be a module to manage Alert Policies in OME or OME-M. I ran into this when using the module to configure Syslog Forwarder...

ome_diagnostics with MX7000 may not pull all needed files

2

##### Summary I have opened support cases for an MX7000 chassis and used the ome_diagnostics module to collect logs from the chassis to a CIFS share using `log_type: support_assist_collection` In...

##### Summary Using 5.2.0 and the ome_diagnostics module. When running in Run mode, after successfully extracting logs to a CIFS share, the result status shows OK. This is misleading as...

Request: Certificate validation to use OS trusted root certificates first

4

##### Description The updated notes about what types of certificates are expected for the ca_path parameter was helpful in getting me going with them. I do still have concerns about...

Harbor 2.6 from Helm chart?

5

My first experience using helm was to deploy Harbor to an OpenShift cluster. As far as I can tell, I used the same helm chart and values.yaml file and deployed...

Helm Chart README does not list serviceAccount.name Default correctly

2

In the Helm Chart README.md https://github.com/kubernetes-sigs/nfs-subdir-external-provisioner/blob/master/charts/nfs-subdir-external-provisioner/README.md The Configuration table shows that `serviceAccount.name` has a default of `null` which is not accurate. The values.yaml file mentions the current action `# If...

Helm Chart defaults storageClass.allowVolumeExpansion to true when it is not supported

2

As mentioned in the Helm chart README.md file, storageClass.allowVolumeExpansion is defaulted to `true` but the root folder README.md explicitly states in the limitations at the bottom of the file `Storage...