MallocArray

Do you happen to have multiple wireless access points in your location and/or Unifi products? I have a sneaking suspicion that sometimes mine is related to jumping to another AP...

There is a timeout option that defaults to 5 seconds but I've lowered it to 1 second without significant improvement. The ESPHome release that came out this week did a...

Looking much improved with the 2024.6.x releases and all of the changes. I've had uptimes of over 100 hours before I had more changes to test and needed to reboot....

4.0.0 release is available and has the watchdog_timeout extended for devices with ESP32 chips (not available for the Pro and Basic models)

I'm not seeing any configuration options to enable EU channels. You could try specifying your Wifi settings in the YAML file so you avoid the hotspot entirely. Something like: ```yaml...

If anything, this appears to be an issue with ESPHome itself, so if continued effors are needed, please open an issue there https://github.com/esphome/issues/issues

The names of the sensors are different between the configs, so if you have a card with the former sensors names, they will show nothing. Try going to Settings>Devices and...

Were you able to get the new sensor names?

Does the display on the device show valid data? This should help clarify if the device isn't getting good values at all, or just not sending them to HA correctly....

My mistake for not re-reading this closely. I double checked ajfriesen's config and are using the same pins as my config: https://github.com/ajfriesen/ESPHome-AirGradient/blob/main/air-gradient-open-air.yaml#L484 Is yours the PPT model with dual PM2.5...