Magnus Thomé

Some more findings. With any rest.label() included in the code the max number of rest.button() is one. With no rest.label() included the max number of rest.button() is two These being...

I have it working on a CSL Elite+ base https://rejsa.nu/forum/viewtopic.php?p=1588680#1588680

Hi! I use an Arduino Nano with his code just as is with no changes: https://github.com/lshachar/Arduino_Fanatec_Wheel/blob/master/arduino_fanatec_wheel.ino I also connected everything 100% according to his diagram: https://github.com/lshachar/Arduino_Fanatec_Wheel/blob/master/schamtics%20arduino%20nano-level%20shifter-fanatec%20round%20plug.png It works right away....

The Fanatec property page in Windows says: PC driver: 328 WB FW: 630 But I've found a problem, depending on what Aduino board I use it works or not. With...

Pistolidas, did you connect the two ground pins to each other? Its a long shot but might affect the function a bit differently on different base version, who knows...

Can the 32u4 act as SPI slave like the 328p? Curious to what choices we have to choose as controller chip.

I think the Pro Mini is 328P 3.3V and it's very small.

I'm a bit confused with your pinout numbering. This is the original connector numbering in Isachars picture? The five uncommented pins are 5V, GND, +D, -D and NC I think....

This pinout works on a CSL Elite + I have here and it defintely works with the same steering wheels as with your Clubsport V2.5

Driver version numbers in upper right corner in picture below :-) I'm using a CSL Elite+